The combined strobe light and siren can add eye-catching audio/visual alarms to the SensorProbe. When triggered, the siren will generate a loud alarm sound and the strobe light will flash brightly, giving a clear indication of an alarm condition.

The siren and alarm are both incorporated into one device - only one RJ45 jack is needed for each combined siren/alarm. Each device comes with a free CAT5 cable, 5 feet in length. Users may connect the siren/strobe light using thier own CAT5 cable up to 1,000 feet, allowing the sensors to be positioned in hot spots.

When a combined siren/strobe light is plugged into the RJ45 port, the SensorProbe will auto detect the sensor and it will display the status of the device.

The siren/strobe light can be triggered manually, via the web interface, or it can be configured to turn on at certain times, through the web interface. The device can be triggered by any sensor connected to the SensorProbe, or by an alarm condition generated by the SensorProbe, and can be fully integrated with the Sensor Notification Matrix on our Linux-based SecurityProbe systems.

Each device has its own SNMP OID, so the status can be collected over the network and graphed using external applications, like MRTG.

Specifications & Features:

	Measurement range: Alarm or Normal
	Communications cable: RJ45 jack to sensor using UTP Cat5 wire
	Maximum extension cable length: 305m (1000 ft.) with approved low capacitance shielded cable or UTP
	Sensor type: open/closed contact switch
	Power source: Powered by the sensorProbe. No additional power needed.
	SensorProbe auto detects the presence of the Siren and Strobe Light Sensor
	Measurement rate: multiple readings every second
	Up to 2 Siren and Strobe Light Sensors per BitSight2, 8 per BitSight8 and SecurityProbe
	Full autosense including disconnect alarm