The Sensor Controlled Relay can control the electrical power to devices managed over the Internet. Configuration and integration with the SensorProbe product series is simple. The Sensor Controlled Relay defines a new era in energy management.

The Sensor Controlled Relay is easily controlled by any of Ravica's extensive selection of sensors. The relay can provide automatic responses to sensor alerts. This is useful, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the Motion Detector is triggered. Setting up the Sensor Controlled Relay is easy with its built in autosense feature and user friendly web interface.

The Sensor Controlled Relay can also be controlled via external computers, using the included SNMP command line utilities either interactively or programmatically. In addition, the Sensor Controlled Relay can be controlled via the SensorProbe's integrated web interface.

The Sensor Controlled Relay provides 1 high-power SPDT 5V relay, with the maximum load up to 15A at 220 VAC. It includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relays from high voltage spikes or noise transients. It monitors the power and load, and accepts a control signal, which is sent from the SensorProbe.

A simple, point and click web manager can set link the Sensor Controlled Relay to a sensor. When the sensor goes to the chosen state, for example, High Critical, the Relay can be made to cycle, which will turn on and then turn off the external device for the selected period of time. In this case, when the sensor goes High Critical, the automatic response system will cycle the relay for 20 seconds. Users can easily change the fields in the Relay Settings Menu, according to their needs, using the dropdown list boxes.

The Sensor Controlled Relay, with the automatic response feature, can give users more flexibility in responding to environmental alerts. Automatic response eliminates the need for user intervention during the alarm condition.

The Sensor Controlled Relay has a built in 16Amp circuit breaker and a 15Amp fuse (380 VAC, 125 VDC) to give the double protection for the external devices from possible damages by electrical fault.

The status of the Sensor Controlled Relay is reported by 4 LEDs on the board. Remote monitoring of the status is available using SNMP traps or the web interface, as well as e-mail and SMS alerts.

Note: All orders are assumed to be for a 110V USA based supply voltages; however, a 220V version is available for deployment with EU based voltage supplies. Contact us for more information on the EU version.

Specifications & Features:

	Relay designed to control mains line voltage: 110VAC, in the US, 220VAC in the EU
	Relay contacts rated up to maximum 15A/220VAC
	Operates from a single +5 V DC Power Supply from the sensorProbe
	Metal Oxide Varistors (MOVs) and snubber circuit protect the open contacts of the relays from high voltage spikes
	4 LEDs indicate the status of the Relay, Power Supply, AC Line Voltage and AC Load Voltage
	Up to 2 Sensor Controlled Relays per BitSight2, 8 per BitSight8
	Full auto-sense including disconnect alarm
	Input Voltage: 110VAC (US Version) - 220 VAC (EU Version)
	Output Voltage: 110 VAC (US Version) - 220 VAC (EU Version)
	Dimensions 115 x 80 x 40 mm
	Operating Temperature -40°C to 85°C
	Storage Temperature -40°C to 85°C

Relay:

	Contact Rating 15 A @ 220 VAC, 25 VDC with Resistive Load 8 A @ 220 VAC, 25 VDC with Inductive Load (P.F=0.4, L/R=7 mS)
	Contact Material AgCdO
	Carry Current 16 A
	Max. Operating Voltage 380 VAC, 125 VDC
	Max. Operating Current 16 A
	Max. Switching Capacity 4,000 VA, 480W with Resistive Load 2,000 VA, 240W with Inductive Load (P.F=0.4)
	Power Consumption 5V @ 200mA
	15Amp Fuse 380 VAC, 125 VDC

Applications:

	Power Switching
	On/Off Control
	Activate Alarms
	Process Control
	Energy Management Systems
	Weight ≈250 grams