|
The Ravica Airflow Sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized, if this cooling airflow stops.
The Airflow Sensor is placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The SensorProbe displays this information using a graphical display via its web interface. In addition to an on/off indication, it also graphs the analog values over a period of time. If, for example, the fan slows down, the user will be given an indication of change over time. This may happen if the fan is close to failure or the air filter is clogged.
In addition to a web interface, an SNMP interface is provided for ALARM/NORMAL status indication, and to get the current analog value. SNMP traps are sent when ALARM status is detected. When an alarm condition is activated, the description and location of the fault can be sent via email or page.
Specifications & Features:
 |
On/off alarm signal of airflow |
 |
Airflow data graphically displayed of over time |
 |
Accurate, cost effective flow sensing |
 |
Operates from a single +5 VDC power supply which is powered by the SensorProbe |
 |
2 LEDs indicate the status of airflow and ensures the sensor is securely plugged into the SensorProbe |
 |
Electronics mounted in a small plastic case |
 |
Sensor type: open/closed contact switch |
 |
Power source: powered by the SensorProbe. No additional power needed. |
 |
sensorProbe auto detects the presence of the Airflow Sensor |
 |
Up to 2 Airflow Sensors per BitSight2, 8 per BitSight8 and SecurityProbe |
 |
Full autosense including disconnect alarm |
 |
Data graphically displayed via a web page |
 |
Measurement rate: one reading each second, data logging once per minute |
 |
Sensor type: Thermistor |
 |
Sensor power: line power from SensorProbe |
 |
Communication cable: RJ45 jack to SensorProbe |
 |
Trap information: Warning sensor number, Sensor description, Airflow (%) |
 |
Operating temperature: -20° C to 60° C |
|