5 Input Dry Contact Sensors

Environmental and security monitoring solutions

An optional feature of the BitSight2DC is the ability to have up to 5 dry contact inputs per RJ45. This gives a total possible inputs of 10 per BitSight2DC, by utilizing both of the RJ45 sensor ports.

These dry contact ports can be used to monitor any dry contact inputs, just like the normal autosense dry contact ports, but these ports can only be set to operate in the input mode. These additional sensors are labeled as ports 3 to 12.

Note: The 10 Input Dry Contact Sensor is designed to work with the BitSight line of SensorProbes only, and is NOT compatible with the BitSight8 or SecurityProbe models.

Specifications & Features:

	Measurement range: Alarm or Normal
	Communications cable: RJ45 jack to sensor using UTP Cat5 wire
	Sensor type: open/closed contact switch
	Input voltage range: 0 to 5 volts
	Normal input voltage is settable under software
	Normally open or normally closed is settable under software
	Power source: Powered by the sensorProbe. No additional power needed.
	Measurement rate: multiple readings every second
	Up to 5 dry contact inputs per RJ45 jack, which is up to 10 dry contact inputs on a BitSight2DC